The machine is widely used in pharmaceutical, chemical, food, metallurgy, light industry and scientific research units, can be very evenly mixed with good fluidity of powder or granular materials, so that the mixed material can achieve the best mixing state.

       In the operation of the machine, due to the multi-direction operation of the mixing barrel, various materials in the mixing process, accelerate the flow and diffusion, while avoiding the general mixer due to the centrifugal force of the material specific gravity segregation and accumulation phenomenon, mixing without dead Angle, can effectively ensure the best quality of the mixed materials. Structure: The machine is composed of frame, transmission system, electrical control system, multi-direction motion mechanism, mixing barrel and other components. The mixing barrel in direct contact with the material is made of stainless steel material, and the inside and outside walls of the barrel are polished. Fully comply with GMP requirements.

Working Principle:

During the operation of the 3D motion mixer, due to the multi-directional movement of the mixing barrel, various materials are accelerated in flow and diffusion during the mixing process, while avoiding the phenomenon of material density segregation and accumulation caused by centrifugal force in general mixers. The mixing has no dead corners and can effectively ensure the best quality of the mixed materials.

Product Features:

1, the machine is used in pharmaceutical, chemical, food, light industry, electronics, machinery, mining and metallurgy, national defense industry and scientific research units of powder, granular material high uniformity mixing.

2, the material has no centrifugal effect, incomparable segregation and stratification, accumulation phenomenon, each component can have a wide weight ratio, the mixing rate of more than 99.9%, so that the current various mixers in a better product.

3, large loading rate, up to 80%, high efficiency, short mixing time.

4, the simplified parts of the arc transition, and after precision polishing treatment, to meet the GMP requirements

Product Structure:

The 3D motion mixer consists of a machine base, transmission system, electrical control system, multi-directional motion mechanism, mixing bucket and other components. The mixing bucket that comes into direct contact with the material is made of stainless steel material, and the inner and outer walls of the bucket are polished.